Macumbista Benjolin V3

The Benjolin is a standalone synthesizer designed by Rob Hordijk from the Netherlands. It contains two oscillators (one LFO and one VCO), a voltage controlled filter and a circuit called a “Rungler”, which allows chaotic cross-modulation possibilities between the different parts of the circuit. Hordijk refers to the Benjolin as a circuit which has been “bent by design.”

These hand-made Macumbista Benjolins have been further customized with a patchbay, which can be used to interface with other modular synthesizers or to setup further control voltage feedback systems within the Benjolin itself, attenuators on the three control voltage input and LEDs displaying the internal state of the Rungler.

FEATURES

The patchbay of these Benjolins has banana jack connections for the square and triangle waveforms of each of the two oscillators, the Pulse Width Modulation output of the two oscillators, the Rungler output, the XOR (exclusive/or) logic operation of the two oscillators and the output of the filter.

There are also banana jack control voltage inputs with attenuators for the frequency of each of the two oscillators and the filter cutoff frequency. The layout of the panel is designed to be both intuitive and playable (unlike many EuroRack modules, for example…). And finally, the three output bits of the Rungler have been visualized with red, green and blue LEDs.

All Benjolins use a Neutrik 6.3mm (1/4″) output jack , an additional GROUND banana jack to interface with other modular systems and a 12 VAC “wall wart” power supply (mainland European and North American versions available).

These Benjolins are produced under licensed agreement with Rob Hordijk.

PRICE

The Benjolin V3 is no longer being produced. Please visit the page for the Benjolin V4 for more info!

Please contact me using the CONTACT page here, or through MACUMBISTA at-the-domain GMAIL dot COM. Thank you for your kind attention.

VIDEOS + IMAGES

Duelling Benjolins from macumbista on Vimeo.

Two Benjolins cross-patched to modulate each other.

CNC-BENJOLIN-TOP

As of summer 2015, all alu front panels of my Benjolins and Butterfly Benjolins are CNC-engraved (rather than hand-stamped as previously).

end-jan-benjos

start-feb-benjos

Current wooden box options as of Fall 2015: natural finish and “hammered” grey, green, blue and red (limited supplies of all “hammered” finishes!!!!)